0.0

TEMPLATE

Vorgegebener Schablonenname, schreibgeschuetzt

string (24)

Mandatory

Kat.I

1.0

EU_CD_RW

Internationaler Code des RiverWaterBody. Der Code setzt sich zusammen aus dem MemberStateCode, dem Schlüssel für die Feature Class und einer landesspezifischen Wasserkörper-ID (für Deutschland gilt: MS_CD_RW). Generell: <MemberStateCode>_ <FeatureClassCode>_<ID>

string (42)

Mandatory, primary key

Kat.I

2.0

RBD_CD

Kennung für die Flussgebietseinheit. Der Code besteht aus einer vierstelligen Nummerierung für die Flussgebietseinheit.

string (4)

Mandatory

Kat.I

2.1

WA_CD

Kennung fuer das Bearbeitunsgebiet bzw. den Koordinierungsraum. Der Code besteht aus einer vierstelligen Numerierung fuer das Bearbeitungsgebiet bzw. den Koordinierungsraum.

string (10)

Mandatory

Kat.I

2.2

LAND_CD

Der CountryStateCode wird in Anlehnung an die Regelungen der DIN EN ISO 3166-1 und DIN ISO 3166-2 aus zwei Alpha-2 Schluesseln zusammen gesetzt. Der erste Teil des Schluessels entspricht dem CountryCode, der zweite Schluesselbestandteil steht fuer die Verwaltungseinheiten (Bundesland). Fuer Deutschland sind diese Verwaltungseinheiten vorgegeben. Fuer andere Laender ist der Alpha-2 Schluessel (XX) frei waehlbar.

string (4)

Mandatory, primary key

Kat.I

2.4

INS_WHEN

Erstellungsdatum des Datensatzes

date (8)

Mandatory

YYYYMMDD

Kat.I

2.5

INS_BY

Ansprechpartner

string (15)

Mandatory

Kat.I

2.6

METADATA

Der Name der Metadatendatei ist abhaengig vom hier erfassten Gebiet. Er kann auf vier verschiedene Arten gebildet werden. Er setzt sich zusammen aus der Kurzbezeichnung fuer die Schablone, dem CountryStateCode, dem WorkAreaCode oder dem RiverBasinDistrictCode und wird um die Dateinamenserweiterung XML ergaenzt. Alle Angaben sind in Grossbuchstaben auszufuehren.Schema: <TemplateShortName>_ <CountryStateCode>_ <WorkAreaCode>.XML or <TemplateShortName>_ <CountryStateCode>_ <RiverBasinDistrictCode>.XML or <TemplateShortName>_ <CountryStateCode>.XML or <TemplateShortName>_ <WorkAreaCode>.XML Beispiel: fuer Nordrhein-Westfalen fuer den Niederrhein: COMPATH_DENW_2800.XML fuer Nordrhein-Westfalen fuer den Rhein COMPATH_DENW_2000.XML fuer Nordrhein-Westfalen: COMPATH_DENW.XML fuer das Gesamtgebiet Niederrhein: COMPATH_2800.XML

string (255)

Mandatory

Kat.I

3.0.2

QE11VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.0.4

QE11MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE11VAL <> "8"

Kat.II

3.0.6

QE11CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE11VAL <> "8"

Kat.II

3.0.7

QE11COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.1.2

QE12VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.1.4

QE12MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE12VAL <> "8"

Kat.II

3.1.6

QE12CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE12VAL <> "8"

Kat.II

3.1.7

QE12COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.3.2

QE122VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Optional

3.3.4

QE122MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE122VAL <> "8"

Kat.II

3.3.6

QE122CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE122VAL <> "8"

Kat.II

3.3.7

QE122COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.4.2

QE123VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Optional

3.4.4

QE123MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE123VAL <> "8"

Kat.II

3.4.6

QE123CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE123VAL <> "8"

Kat.II

3.4.7

QE123COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.5.2

QE124VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Optional

3.5.4

QE124MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE124VAL <> "8"

Kat.II

3.5.6

QE124CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE124VAL <> "8"

Kat.II

3.5.7

QE124COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.6.2

QE13VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.6.4

QE13MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE13VAL <> "8"

Kat.II

3.6.6

QE13CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE13VAL <> "8"

Kat.II

3.6.7

QE13COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.7.2

QE14VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.7.4

QE14MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE14VAL <> "8"

Kat.II

3.7.6

QE14CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE14VAL <> "8"

Kat.II

3.7.7

QE14COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.8.2

QE21VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.8.4

QE21MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE21VAL <> "8"

Kat.II

3.8.6

QE21CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE21VAL <> "8"

Kat.II

3.8.7

QE21COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.9.2

QE22VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.9.4

QE22MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE22VAL <> "8"

Kat.II

3.9.6

QE22CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE22VAL <> "8"

Kat.II

3.9.7

QE22COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.10.2

QE23VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.10.4

QE23MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE23VAL <> "8"

Kat.II

3.10.6

QE23CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE23VAL <> "8"

Kat.II

3.10.7

QE23COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.11.2

QE311VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.11.4

QE311MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE311VAL <> "8"

Kat.II

3.11.6

QE311CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE311VAL <> "8"

Kat.II

3.11.7

QE311COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.12.2

QE312VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.12.4

QE312MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE312VAL <> "8"

Kat.II

3.12.6

QE312CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE312VAL <> "8"

Kat.II

3.12.7

QE312COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.13.2

QE313VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.13.4

QE313MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE313VAL <> "8"

Kat.II

3.13.6

QE313CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE313VAL <> "8"

Kat.II

3.13.7

QE313COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.14.2

QE314VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.14.4

QE314MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE314VAL <> "8"

Kat.II

3.14.6

QE314CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE314VAL <> "8"

Kat.II

3.14.7

QE314COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.15.2

QE315VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.15.4

QE315MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE315VAL <> "8"

Kat.II

3.15.6

QE315CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE315VAL <> "8"

Kat.II

3.15.7

QE315COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.16.2

QE3161VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.16.4

QE3161MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE3161VAL <> "8"

Kat.II

3.16.6

QE3161CHAN

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE3161VAL <> "8"

Kat.II

3.16.7

QE3161COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.17.2

QE3162VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.17.4

QE3162MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE3162VAL <> "8"

Kat.II

3.17.6

QE3162CHAN

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE3162VAL <> "8"

Kat.II

3.17.7

QE3162COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

3.18.2

QE33VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.18.4

QE33MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE33VAL <> "8"

Kat.II

3.18.6

QE33CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE33VAL <> "8"

Kat.II

3.18.7

QE33COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

Kat.II

6.2

ECO_STAT

Einstufung des ökologischen Zustands von natürlichen Wasserkörpern nach WRRL-Anhang V (1.4.2.(i))

string (1)

Conditional, mandatory for Rwcharacter Artificial = "N" and Rwcharacter HeavilyModified = "N"

Kat.I

6.3

ECO_POT

Einstufung des ökologischen Potentials von künstlichen oder erheblich veränderten Wasserkörpern nach WRRL-Anhang V (1.4.2.(ii))

string (1)

Conditional, mandatory for Rwcharacter Artificial = "Y" or Rwcharacter HeavilyModified = "Y"

Kat.I

6.14

ECO_ASSC

Required. Indicate the confidence on the ecological status assigned. '0' = No information. '1' = Low confidence. '2' = Medium confidence. '3' = High confidence. The criteria used by Member States to assess confidence vary considerably, but general guidance may be: Low = no monitoring data; Medium = limited or insufficiently robust monitoring data; High = good data. LAWA-interne Festlegung: es ist für DE grundsätzlich '3' für 'High confidence' einzugeben

string (1)

Mandatory

Kat.I

6.15

CHEM_ASSC

Required. Indicate the confidence on the chemical status assigned. ‘0’ = No information. ‘1’ = Low confidence. ‘2’ = Medium confidence. ‘3’ = High confidence. The criteria used by Member States to assess confidence vary considerably, but general guidance may be: Low = no monitoring data; Medium = limited or insufficiently robust monitoring data for some or all Priority Substances that are discharged in the RBD; High = good data for all Priority Substances that are discharged in the RBD. LAWA-interne Festlegung: es ist für DE grundsätzlich '3' für 'High confidence' einzugeben

string (1)

Mandatory

Kat.I

6.50

CHEM_STAT

Einstufung des chemischen Zustandes nach WRRL-Anhang V (1.4.3)

string (1)

Mandatory

Kat.I